Attachment Hire Perth. Built For Versatile Site Work
Get reliable attachments that arrive ready to perform on site. Part of a fleet of 100+ machines and accessories, our range is built for contractors who need versatility without delays. No chasing gear. No downtime. Just attachments that match your machine and get the job done.
Ideal for digging, trenching, grading, and specialised site work across Perth. From buckets to augers and more, each attachment is maintained and ready to go when you need it.
RockBreaker Attachments
900kg – 1200kg Range
RS 100 Series
- Designed for excavators between 900kg and 1200kg
- 40mm chisel size
- Unit weight approx. 100kg
- Overall length around 1000mm
- Operating pressure range 90 – 120 kg/cm²
- Oil flow requirement 15 – 25 L/min
- Impact rate between 900 – 1400 bpm
- 1/2″ hose connection
- 25mm pin size
1200kg – 3500kg Range
RS 200 Series
- Suits excavators from 1.2t to 3.5t
- 45mm chisel diameter
- Unit weight approx. 167kg
- Overall length around 1300mm
- Operating pressure range 90 – 120 kg/cm²
- Oil flow requirement 20 – 40 L/min
- Impact rate between 700 – 1200 bpm
- 1/2″ hose connection
- 30mm pin size
3500kg – 6000kg Range
RS 400 Series
- Built for excavators between 3.5t and 6t
- 68–70mm chisel size
- Unit weight approx. 363kg
- Overall length around 1700mm
- Operating pressure range 110 – 140 kg/cm²
- Oil flow requirement 40 – 70 L/min
- Impact rate between 500 – 900 bpm
- 1/2″ hose connection
- 45mm pin size
6000kg – 8000kg Range
RS 600 Series
- Suitable for excavators from 6t to 8t
- 75mm chisel size
- Approx. unit weight 450kg
- Overall length around 1750mm
- Operating pressure between 110 – 160 kg/cm²
- Oil flow requirement 50 – 90 L/min
- Impact rate 500 – 800 bpm
- 1/2″ hose connection
- 50mm pin size
9000kg – 12000kg Range
RS 800 Series
- Designed for 9t to 12t excavators
- 85mm chisel diameter
- Approx. unit weight 730kg
- Overall length around 2100mm
- Operating pressure between 120 – 170 kg/cm²
- Oil flow requirement 60 – 100 L/min
- Impact rate 400 – 700 bpm
- 3/4″ hose connection
- 50mm pin size
12000kg – 16000kg Range
RS 900 Series
- Built for excavators from 12t to 16t
- 100mm chisel size
- Approx. unit weight 970kg
- Overall length around 2400mm
- Operating pressure between 150 – 170 kg/cm²
- Oil flow requirement 80 – 120 L/min
- Impact rate 400 – 700 bpm
- 3/4″ hose connection
- 65mm pin size
16000kg – 19000kg Range
RS 1600 Series
- Designed for excavators between 16t and 19t
- 135mm chisel size
- Approx. operating weight 1950kg
- Overall length around 2700mm
- Working pressure range 160 – 180 kg/cm²
- Oil flow requirement 120 – 160 L/min
- Impact frequency 400 – 700 bpm
- 1″ hose connection
- 75mm pin size
19000kg – 25000kg Range
RS 1900 Series
- Suits excavators from 19t to 25t
- 140mm chisel diameter
- Approx. unit weight 2050kg
- Overall length around 2860mm
- Operating pressure between 160 – 180 kg/cm²
- Oil flow range 130 – 170 L/min
- Impact rate 400 – 600 bpm
- 1″ hose connection
- 80mm pin size
28000kg – 40000kg Range
RS 3500 Series
- Built for large excavators from 28t to 40t
- 155mm chisel size
- Approx. unit weight 2850kg
- Overall length around 3100mm
- Operating pressure between 240 – 260 kg/cm²
- Oil flow requirement 180 – 240 L/min
- Impact frequency 250 – 400 bpm
- 1 1/4″ hose connection
- 80mm pin size
36000kg – 48000kg Range
RS 4500 Series
- Suits excavators from 36t to 48t
- 165mm chisel diameter
- Approx. unit weight 3160kg
- Overall length around 3286mm
- Operating pressure between 240 – 260 kg/cm²
- Oil flow requirement 180 – 240 L/min
- Impact rate 250 – 350 bpm
- 1 1/4″ hose connection
- Pin size 100mm – 110mm
Fittings, Quick Couplers
Off The Shelf Products
We stock a full range of quick connect fittings ready for immediate use. From 1/4 inch through to 2 inch sizes, everything is available when you need it.
Designed to suit a wide range of machines and attachments, these fittings make connecting and changing equipment fast and simple on site. No waiting on orders. No delays holding up your job.
Pre-Made Hoses
Off The Shelf Products
We always hold all a large range of pre made hoses for all sizes of Rock breakers. So after 5pm and weekends you don’t have to worry about how long it will take to get you back up and running .
Attachments
Block Lifters
Limestone block grabs are a practical attachment designed to work alongside a lifting boom or jib. They help reduce manual handling by allowing operators to lift, position, and align blocks with greater control.
This setup improves efficiency on site while making block placement faster, safer, and more accurate.
Rippers
Single tyne rippers are built for strength, control, and consistent performance in tough ground conditions. Designed for precision ripping, they deliver the force needed to break through compacted soil and hard surfaces.
Reinforced with Bisalloy wear plates and a heavy-duty top box, these rippers are made to handle demanding work without compromise.
Rock Drills
Rock drills are designed for fast, clean drilling in hard ground and rock. When paired with an auger and trailer-mounted compressor, they provide a complete solution for drilling applications on site.
Ideal for fencing, footings, and other jobs that require accurate holes in rock, these attachments help you get the job done quickly and efficiently.
Tilt Buckets
Tilt buckets add flexibility to your excavation work by allowing angled digging and shaping. This makes them ideal for finishing work where precision is needed.
Perfect for ponds, dams, drainage, and culvert projects where clean lines and control matter.
Rock Augers
Rock and tungsten auger bits are built for powerful, accurate drilling in hard ground conditions. They deliver consistent performance when standard augers cannot handle the job.
Designed with a secure shaft system to prevent disengagement, these attachments improve safety while maintaining reliable drilling performance on site.
Hydraulic Vibe Plate
Excavator-mounted vibe plates are designed for efficient soil compaction in trenches, footings, and deeper excavations. They provide strong, even compaction without the need for manual equipment.
Operate directly from the cab to keep workers clear of the compaction zone, improving safety while maintaining productivity on site.
Augers
Auger drives deliver strong, controlled power for accurate drilling across a range of ground conditions. Built to handle demanding site work, they provide consistent performance when precision matters.
This attachment features a secure shaft locking system designed to prevent disengagement, helping reduce risk on site and keep operators working safely.
Rake Buckets
Sieve rake buckets are built with a multi-radius profile to increase load capacity while improving breakout force. This design helps move more material with each pass.
By slightly lifting the rear section out of the wear path, these buckets reduce long-term wear and extend equipment life, making them ideal for sorting, clearing, and site prep.